? for smaller tanks and restricted space ? use in sewer and industrial waste water ? shape avoids ?ragging?, in sewer systems ? unaffected by suspended solids ? operates in turbulent fluids this is suitable for use in water, industrial wastewater and sewage, that can have wide variations of temperature. this small design of switch is for use in more confined spaces, where there is not enough room for the larger ffsmc type. the rounded body design and floating attitude prevents accumulation of solids on the body. the switch has additional internal ballast, to bring the centre of gravity and rotation close to the cable entry point. the switching element is a self cleaning type, that makes the complete switch insensitive to humidity and condensation, allowing this type to operate in widely fluctuating temperatures. the switch contacts are rated at 10 amp resistive. supplied, as standard, with 5 metres cable and adjustable counterweight. cynergy3 components ltd 7 cobham road ferndown industrial estate wimborne dorset bh21 7pe tel: +44 (0) 1202 897969 sales@cynergy3.com on - off differential 15 15 off - on 47 75 minimum cable pivot length 120mm technical specifications lm10a lm10b lm10c ww w contact form n/o n/c c/o material high density polyethylene temp range c 0 / +55 c (wras approved up to +23 ) f + 32 / +131 cable (standard length 5m) with protective earth no earth standard cable covering wrc approved max. working pressure 10 bar electrical specifications power rating max ac : 750 va dc : 180w switching voltage max ac : 250 v dc : 110 v switching current max. resistive 10 a switching current max. inductive ac : 4a dc : 1 a 129 it is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive. lm series wras approved www .cynergy3.com iso 9001 certified ? 2014 cynergy3 omponents, all rights reserved. c specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cy nergy3 components limited.
part numbering system series max. current contact form a = n/o b = n/c c = c/o w wrc approved = cable length in mtrs: blank = 5m standard lm 10 a 10 w cable covering: installation cable external counterweight differential pipe cable entrance tie brown wiring diagram for emptying pump wiring diagram for filling pump black brown pump - on level drop pump - off black pump - off level drop pump - on brown blue blue brown www .cynergy3.com iso 9001 certified ? 2014 cynergy3 omponents, all rights reserved. c specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cy nergy3 components limited. lm series wras approved
|
